Articles - Page 48 of 51 - DetailingWiki, the free wiki for detailers

Articles related to decontamination

What is a fallout remover

A fallout remover is a special product aimed at decontamination that has the chemical ability to help you to remove iron(III)oxide particles from a surface without having to remove them mechanically. These particles are loosened up via a chemical process, that allows for them to be rinsed off safely. This product is sometimes also called “Iron-X”. This is not the name of the liquid, but a productname of Carpro Trading Ltd, which is only one of many fallout removers on the market.

Common used abbreviations and acronyms

Within the world of detailing, there are quite a lot of abbreviations. These are often used on the internet to shorten a piece of text. A few of these are actually so common that people even use them in speech. One of these is QD. This abbreviations is used on the internet and many people actually call it a QD when they are talking about the product. Not all of them are very popular. Some are so popular that even manufacturers started using them. DA is one of these abbreviations. This stands for Dual Action, which got shortened to DA. And several manufacturers actually use the term DA these days. Because not everybody knows what these abbreviations mean, we created the tooltip. When you hover with the mouse over one of these abbreviations you get to see a tooltip with the explanation.

What is a polish

A polish is an abrasive or chemical product that is mostly used to remove surface defects by removing a very thin layer of the product. If the removed layer is the same thickness as the depth of the surface defect, you will end up with a smooth surface that will not have a surface defect anymore. Many polishes are liquid, but not all. There are also polish-paste products.

Machine polishing a sharp contour by rotary

Yes, more videos of rotary polishing techniques (DA ones will be following soon as well), this time for panels with sharper edges and contours and as an example the wing of a Jaguar XJ was used. two videos here, covering roughly the same point.

Why is a proper washing technique important

Millions of people wash their car using a sponge. But if you read the threads on this forum you will see that hardly any members are washing their cars using a traditional sponge. Why is that? It all comes down to the flat face of the sponge. Imagine automotive paintwork with your typical dirt and grit particles stuck on the top of the paint, that you want to wash off to reveal your car’s shine. Some of these dirt particles are sharp.

From enthusiast to pro – My perspectives on starting a detailing business

Detailing is in relative terms, one of the UK’s youngest industries and in many senses we have the privilege of being at the forefront of it. I’m not saying shiny cars are new… but the phrase “detailing”, the air of “detailing” is a new concept as evidenced by how poorly known it still currently is.

The “best” product

It is often asked on detailing fora and social media: “what is the best XXXX”. Off course there is a difference between certain products and brands, but it is important to know what you are asking. In this guide I will try to explain what the problem is with this question unless it is asked more in-depth.

Claying demonstration

Just a couple of videos describing the claying process… The purpose of clay is to remove bonded contaminants that are stuck to the paintwork, and these two videos demonstrate typical claying technique on a small section of paintwork. Ensure you use plenty of lubrication and no pressure when claying to avoid leaving marring in the finish.

How To Choose a Pad & Polish Combo for Paintwork

So, you’ve got all the gear, you know how to handle the machine polisher – but how do you choose what pad and polish combination to use to achieve correction on your paint finish? This thread tackles that very question. It is not brand specific, so the basics here apply to all polish ranges.

Introducing a Newbie to DA Polishing

The DA (Dual Action) polisher is considered by many to be the machine to use if you are new to machine polishing, though as discussed elsewhere, this is not always the case – rather, you should try wherever possible to try both styles of machine (DA and rotary) and see which suit your style the best as many will find the vibrations of DA polisher unsettling and this struggle with the control of the machine can actually make it more dangerous than the smoother rotary.

Sidebar