Detailed knowledge for detailersArticles related to decontamination
A silicone remover is specially designed product that is aimed at breaking the polymer bonds that are the basis behind a silicone product. This product can be used to clean of certain substances from an area, for example: cleaning of residue from a protective product before applying a coating.
There are 2 general ways for deep cleaning fabric. Using a vacuum cleaner (just removing surface dirt), or using a wet/dry vacuum cleaner (deep clean the fabric). When you deep clean fabric, you need to take into account that you will spent a lot more time on it.
When cleaning a convertible, you may have to clean the soft top. This is a fabric canopy that covers the cabin of the car. This fabric needs to be cleaned before it can be protected.
This is the act of removing said contamination. The aim of turning a contaminated area into a pure and perfectly clean area. Decontamination can be achieved in several different ways.
Contamination is a word that is used frequently in the world of detailing. It refers to the matter on top a surface that shouldn’t be there. They are contaminating the surface, or you can say that they are contaminants. The removal of these contaminants results in a perfectly clean surface. A surface in which the only variable you have to take into account, is the material of the surface itself.
Within detailing, there are many different types of product. Within the group of cleaning products, there are sub-categories. Amongst them is the wheel cleaner. This is a specific cleaning products designed to clean wheels. This product will be specifically aimed at removing dirt that is most common for this area, such as brake dust, grime, mud, tar and several more. Not all wheel cleaners attack all these contaminants, but most attack many of them.
A fallout remover is a special product aimed at decontamination that has the chemical ability to help you to remove iron(III)oxide particles from a surface without having to remove them mechanically. These particles are loosened up via a chemical process, that allows for them to be rinsed off safely. This product is sometimes also called “Iron-X”. This is not the name of the liquid, but a productname of Carpro Trading Ltd, which is only one of many fallout removers on the market.
Just a couple of videos describing the claying process… The purpose of clay is to remove bonded contaminants that are stuck to the paintwork, and these two videos demonstrate typical claying technique on a small section of paintwork. Ensure you use plenty of lubrication and no pressure when claying to avoid leaving marring in the finish.
Clay is putty-like substance that is used to remove contaminants from a surface. Clay removes particles that can’t be removed by washing or are difficult to remove with chemical cleaning.
Claylube is a specific liquid that helps to lubricate the surface when claying. Without this lube, the clay will leave a lot of marring due to it being fairly rough and having a very high level of friction when moving.