What machine polisher for what job
Written by: Vinnie van Rooij
There are a few different kinds of machine polishers on the market, these are designed with different strengths and weaknesses. Knowing what machine suits which job the best can help to make the job easier or achieve better results.
The rotary
The rotary is a very common polishing machine. It’s appearance resembles that of an angle grinder. This was also one of the first polishing machines as the general machine was already in existence, they only needed to turn down the speed. The rotary spins in only 1 motion, it spins on 1 axle. This motion makes polishing fairly effective and allows to achieve more cut at a faster rate. The downside is that it is difficult to get a flawless finish. It is very common to get the so-called “buffer trails” or “holograms” after using this polisher.
The dual action
This machine can also be called an “excenter” or “DA”. This machine is a common choice for novices as it is easy to use and it is fairly safe in the hands of unexperienced people. The look is similar to that of the rotary, but it spins at 2 axles. The pad spins around, but also makes small circles on its own axle. This gives it a “dual action” movement. The benefit of this is that it is much easier to achieve a flawless finish. “Buffertrails” and “holograms” are not very common when using a dual action. The “throw” (difference between maximum out and maximum in from the dual action motion) can differ. There are machines with a throw of 8 mm up to 25 mm.
The buffer
The buffer is a cheap machine that can sometimes be used to buff off wax or polish. It is not very suitable for polishing or other correction jobs, but it is cheap and easy to use.
When to choose what machine
A rotary would be a suitable choice when:
- You need extra cut
- You need speed
- You work with a product that requires a rotary
- You know you will need to refine the polishing anyway
- You are very experienced
- You are using denim pads
A dual action would be a suitable choice when:
- You need a flawless finish
- You are not very experienced
- You work on a delicate surface
- You are finishing your polishing steps
- You are jewlling
- You are applying wax or similar
- You work on very tight places with many corners
A buffer would be a suitable choice when:
- You only need to buff wax
- You have trouble with your muscles
- Your other polisher has broken down
- You need to wipe off polish residue before a wipe down
Different related articles
A tack cloth (also: tack rag, tac cloth) is a special cloth/towel that is covered by a sticky substance. This allows it to grab dirt and remove it by making it stick to the fabric of the towel. ...-
Alchimy7 is a French manufacturer of detailing products, their main focus lies on synthetic products. The complete range includes products for almost every step in the detailing process....
-
A ceramic coating isn't the most easy form of protection to apply. However, the added performance often make it worth the extra effort. Preparing the surface as best as possible will get the best performance out of the coating. ...
-
As with most products, it helps to know how to polish metal. In many cases you can only give a general guide, because even though some products can fall in the same catgory, they might still need a slightly different way of applying. Metal polish is one of those products....
-
A testspot is a small area where you try out different combinations of polish, polishing pads and even machines or techniques, to see what works best with the given situation....
-
Zvizzer is a Germany based manufacturer of detailing related products. The brand started out with polishing pads and have expanded to include more different products. The company also offers trainings....
Links to this article
There are no external links to this article. Yet.