English English Nederlands Nederlands Deutsch Deutsch Italiano Italiano Español Español Français Français 简体中文 简体中文 Português Português Русский Русский
    DetailingWiki Newsletter
    Get free and automatic updates on new articles
    We respect your privacy. No data is used for anything other than sending the newsletter!

    Advertisement

What is polishing by hand

Written by:

Polishing by hand can either refer to applying polish with the bare hands, or by moving the polishing pad by hand instead of using a machine polisher. This article describes the latter.

What is polishing by hand

Polishing by hand is the act of working in polish without the help of a machine, but by moving the polishing pad by hand. This is obviously slower then working with a machine, but will give much more control on the end result. Polishing by hand is usually done when the use of a machine offers to much risk, for example when the paintwork is very thin. Some weekend warriors might use this technique because they might not have the budget available to buy a machine. Polishing by hand can be done with the same material and products as polishing by machine, but some manufacturers make special products to make the process easier.

What to use when polishing by hand

The products and tools that can be used to polish by hand can be the same as the ones you would use with a machine, however some polishing pads can be difficult to hold while moving over the panel. The flat and round polishing pad doesn’t offer much grip. Certain manufacturers have created polishing pads with shapes that offer more grip and are easier to hold on to while moving the pad around. The polishing paste used with these pads can also be the same as when working with a machine, but a few manufacturers have created products that will give more results in a shorter timespan. The downside is that these polishes often require more aftercare to get to the maximum gloss level.

The technique for polishing by hand

Polishing by hand isn’t very difficult or tricky, the movement you make is very similar to that of applying wax or pre-wax to a panel, although the movement when polishing should be a bit faster. There are some different discussions on the movement itself, but in general the most common movement is making small overlapping circles, working in areas of roughly 40cm by 40cm. The smaller the circle you make with your arm, the finer the polishing result. Others feel that making straight lines offers better results. Regardless wether you make small circles of straight lines, the common consensus is still that you should make overlapping movements, and to make a criss-cross pattern. Meaning you work from left to right first, and then from top to bottom (or vice versa). After making several passes, the detailer wipes off the oily polish residue, wipes down the panel with IPA (or similar) and judges the finish. In general, polishing by hand will take a lot longer then polishing by machine.

Different related articles

  • What is paint repair
    Correction
    Paint can be repaired in several different ways. Polishing is very popular one amongst detailers, but not the only one. Some forms of paint repair are: respray, spot-repair and filling in chips. The need for what form of repair often depends on the size of the damage and/or the location....
  • Polishing oxidized paint
    Correction
    There are reasons why paintwork can turn dull. Oxidized paintwork, or UV-damaged paintwork. Oxidized paintwork can look dull and looses its shine. It doesn't turn pale or looses its color, this would be UV-damage, not oxidation....
  • How to prepare paintwork before polishing
    Correction
    When you are going to polish any surface, you are going to rub a product over the surface. While doing this you need a very controlled matter of particles to move over the surface to have any control over the result you'll achieve. Preparing the paintwork will help you to get as much control as possible....
  • How to remove a ceramic coating
    Correction
    Ceramic coatings are very strong forms of protection, but they are not eternal. Eventually they need to be removed in order to prepare the surface for a brand new application of protection. This means the entire layer of ceramic coatings need to be removed....
  • Repair stone chips
    Detailing Miscellaneous
    When you have stone chips, you probably want to fix it. However, it is not like you can just spray paint your car again. Certain stone chips are more easy to repair then others. With a lot of practice, it can give a very good end result....
  • Polished cars stay cleaner
    Detailing Miscellaneous
    A polished car will stay cleaner for longer, and will in fact be much easier to clean, even without protection added. This is due to a surface that so smooth that dirt has less chance of getting caught in the microscopic hills and valleys....

Links to this article

There are no external links to this article. Yet.
Sidebar



Stay up to date with our free newsletter
Always be the first to know about new updates, articles and other informative content.
Don't miss out, opt in!
We respect your privacy. No data is used for anything other than sending the newsletter!