Cleaning a matte surface
Written by: Vinnie van Rooij
Cleaning a matte surface is slightly different to cleaning a regular glossy surface. There are certain things you need to keep in mind to do the job correctly without affecting the matte look.
What is a matte surface
A matte surface is a surface that has a very uneven surface. Because of this uneveness, it doesn’t reflect light in one single direction, but it redirects light in many different direction. This gives it a very different look then a glossy surface. Although a high glossy finish is more popular, many people prefer the look of a matte surface.
The risk when cleaning
The risk you run when cleaning a matte surface is that you unwillingly make it more flat then wanted. For example, if you would use a very light polish to clean the surface, you would actually flatten the surface, increasing the gloss. You would be removing the very things that makes a matte surface matte.
Tips and tricks for cleaning
- Don’t use a shampoo that has any gloss enhancers
- Don’t use a shampoo that contains wax
- Any additives are best avoided, it takes more effort to learn what is acceptable and what is not, then it is to just avoid any additives
- A shampoo without any additives, wax or gloss enhancers would be fine to use
- Use a soft washmitt
- Rub around in circles while washing to get the hair into every microscopic groove
- Be carefull with chemicals, always test in a small area first
- Scratches can be made, but are a bit more difficult to remove
- It is possible to clay, but don’t use a very rough clay and don’t apply to much pressure
- If you use a QD as a clay lube, rinse it off after you are done claying with a panel
- Try not to drag your towel when drying, but pat-dry
- When you have marring from claying, either use a chemical polish or a very fine finishing polish
- Don’t use wax or Glaze
- Any product with gloss enhancers are not recommended
- In case of doubt, always ask the manufacturer
- There are certain products on the market that are specifically designed for a matte surface, but products that are suited for both finishes don’t mention this
Different related articles
Although carwashes are very popular, they are not the place where detailers are found. There is a reason why detailers don't like a carwash. The art called detailing/valeting is very different to the service that is offered by a carwash....-
For defect removal we need at least a polish, a pad and a polishing machine. In this article we describe the materials and reason why to use those materials in particular....
-
In the world of detailing, their are several special cleaning products. Among them is the tar remover. This is a special cleaning product to remove tar and often also glue residue. Tar can come from roads and sometimes at industrial places, it is used in asphalt roads and can be used at construction sites for roofing and some plumbing jobs. It doesn't cause damage, but shows up as ugly black spots which are notoriously difficult to remove....
-
A polish is an abrasive or chemical product that is mostly used to remove surface defects by removing a very thin layer of the product. If the removed layer is the same thickness as the depth of the surface defect, you will end up with a smooth surface that will not have a surface defect anymore. Many polishes are liquid, but not all. There are also polish-paste products....
-
Paintwork protection comes in two generic types: sealants and Waxes. In saome cases there are products which combine the two of these. The paintwork on you car is there not only to look nice but to protect the underlying metal work as well. However, paintwork requires protection of its own as well....
-
Gliptone is an New York, America, based manufacturer of automotive detailing products that has a small range of products. They focus their attention on quality instead of quantity, something that has helped to give them the reputation for delivering high-quality products....
Links to this article
There are no external links to this article. Yet.