Comparing wax, sealant and coating
Written by: Vinnie van Rooij
There are a few different types of protective products in the world of detailing. The main categories are: wax, sealant and coating. The comparison between these product has always been hazy, and customers have great difficulty finding out what product is the best for their situation. We decided to write a guide that might help you to find the best suitable product for what you are after.
Contents
A general overview
When looking at protective products, there are several characteristics that need to be considered to categorize these products.
These are:
- Initial beading
- Long term beading
- Sheeting
- Longevity and UV resistance
- Durability and scratch resistance
- Heat resistance
- Ability to fill defects
- Finish
- Ease of application
- Cost
Dom Colbeck from Dodo Juice has written an excellent article about this topic in his book. We where fortunate enough to be allowed to use his chart which shows the performance of each product, divided per categorie.
In this chart we can clearly see how every product has its benefits and drawbacks.
To put things even more in perspective
We can put this data inside 2 different graphs to turn these words in simple comparable data. (for these graphs we had to assume that the surface has been prepared correctly)
This chart clearly shows how each product has certain points they excel at, and at the same time perform poorly at different aspects.
How they compare against each other
This circular charts shows visually how products stands against each other. On one end we can clearly see how the blue line (wax) excels at the characteristics at the left side. Whereas ceramic coatings actually dominate the right side of the circle.
Sealants and hybrids are a bit in between.
The conclusion
When we analyze this charts we can make certain conclusions. When we put these conclusion in a flowchart, we can actually make a guide that shows you which product is most suited for your situation.
To simply see which product tics what boxen, we have:
And from that we can derive:
Choose wax if you are looking for:
- Good initial beading
- Ability to fill defects
- Warm and deep finish
- Ease of application
- Relative low cost
Scores very bad at:
- Long term beading
- Durability and scratch resistance
- Heat resistance
Choose hybrid if you are looking for:
- Good initial beading
- Ability to fill defects
- Crisp and reflective finish
Scores very bad at:
- Long term beading
- Durability and scratch resistance
Choose sealant if you are looking for:
- Heat resistance
- Crisp and reflective finish
Scores very bad at:
- Long term beading
- Ease of application
Choose ceramic coating if you are looking for:
- Very good initial beading
- Very good long term beading
- Very good sheeting
- Very good longevity and UV resistance
- Very good durability and scratch resistance
- Very good Heat resistance
Scores very bad at:
- Ability to fill defects
- Ease of application
- cost
Different related articles
It is often asked on detailing fora and social media: "what is the best rotary". Off course there is a difference between certain products and brands, but it is important to know what you are asking. In this guide I will try to explain what the problem is with this question unless it is asked more in-depth....-
A polymers is a molecule (or large molecules) that can be used by manufacturers in order to fine-tune a product, or even to add certain properties to it. Polymers can be natural or synthetic. The synthetic group are also called: silicones....
-
Over time, certain detailing products clog spray heads. Typically this is due to either the thickeners in cleaners congealing and blocking the orifice, or sealant polymers curing inside the spray head assembly. Either way, a clogged spray bottle can render useless a perfectly good detailing product, and possibly prevent you from completing a detailing task. This is a guide on how to remedy this issue....
-
Monello is a Dutch brand of detailing products that sells polishes, shampoos, fallout removers, microfiber cloths and several more. The head office is located in the Bergschenhoek, The Netherlands, but it is being sold in several places around the world. ...
-
It is often asked on detailing fora and social media: "what is the best sealant". Off course there is a difference between certain products and brands, but it is important to know what you are asking. In this guide I will try to explain what the problem is with this question unless it is asked more in-depth....
-
When you have stone chips, you probably want to fix it. However, it is not like you can just spray paint your car again. Certain stone chips are more easy to repair then others. With a lot of practice, it can give a very good end result....
Links to this article
There are no external links to this article. Yet.