English English Nederlands Nederlands Deutsch Deutsch Italiano Italiano Español Español Français Français 简体中文 简体中文 Português Português Русский Русский
    DetailingWiki Newsletter
    Get free and automatic updates on new articles
    We respect your privacy. No data is used for anything other than sending the newsletter!

    Advertisement

What is wax

Written by:

Wax is a protective product that is used to protect a surface from outside contaminants. It is made up out of several ingredients with wax as the main ingredient.

Hybrids and natural wax

Wax products can contain polymers to enhance their characteristics, when these polymers are synthetic these are called silicones. When silicones are used in a wax product, this becomes a hybrid. Although the term hybrid does not directly refer to silicone ingredients, it refers to sealants which are polymer-based protective products. A wax with silicone ingredients is therefore considered to be a blend of a wax product and a sealant product.
The term “hybrid” is not often used in the real world. Since the main focus lies on the wax ingredient, there is no obvious need to express the fact that a wax is a hybrid.
Almost every commercial wax contains polymers, but not all of these polymers are synthetic. The wax products that do not contain synthetic polymers (=silicones) are sometimes referred to as natural waxes.

Ingredients

In general, a wax product is made up out of wax as its main ingredient, solvents to carry the wax and to dissipate after application and oils to soften up the product and to help in application.
The wax used can be very different, a few examples are: carnauba wax, beeswax, montanwax, candelilawax etc.
The wax used can depend on certain characteristics. Carnauba wax is very hard, which gives a more glass looking reflection, beeswax is softer and gives colors a warm glow. This is due to the refractive index the wax creates. Several different waxes are often mixed to combine their charateristics and create a wax that is mostly aimed at giving gloss, or enhancing color.

Self-sarcificial

Wax is – unlike most other protective products – self-sacrificial. This means that is prevents dirt from coming into contact with the paint by sacrificing itself. For example, sand particles can get trapped in the layer of wax. By trapping the dirt, it won’t be able to get into contact with the paint underneath, but it does mean that the layer of wax becomes “dirty”. Which in turn means that it needs to be replaced after a certain period of time.
The wax can also break down over time due to it “giving its life” to protect the paint.
Trapping dirt and breaking down causes the surface energy to change, which creates less round drops of water (beading). The beads become more flat, with jagged edges and lower surface-contact angles.

Different related articles

  • Autobrite Direct
    Manufacturers
    Autobrite Direct is a manufacturer and reseller of detailing products and equipment. The company is based in Staffordshire, United Kingdom and is established around 2003. The company also offers detailing courses and complete car care packages....
  • Filling swirls – basic
    Correction
    One method of getting rid of swirl marks is to basically fill up the mark with a filler (a bit like anti-wrinkle cream!!) so that there's no longer a hole and sharp edges to catch the light. This method I prefer for working by hand as it does not require massive effort to break a product down, and by hand this method achieves better results....
  • The best coating
    Detailing Miscellaneous
    It is often asked on detailing fora and social media: "what is the best coating". Off course there is a difference between certain products and brands, but it is important to know what you are asking. In this guide I will try to explain what the problem is with this question unless it is asked more in-depth....
  • What is a primer
    Correction
    The primer coat is used between the material the panel is made from and the layers of paint that will follow. In some cases there can also be filler underneath to make sure the panel is perfectly flat and smooth before starting to paint....
  • Preparing for ceramic coating
    Guides
    A ceramic coating isn't the most easy form of protection to apply. However, the added performance often make it worth the extra effort. Preparing the surface as best as possible will get the best performance out of the coating. ...
  • RestorFX
    Manufacturers
    RestorFX originates from 2006 and was founded by Alexander and Nadia Kay and Tony Dowsett. The company is located in Vancouver, British Columbia, Canada. It is one of only a few Canadian manufacturers of automotive detailing products....

Links to this article

There are no external links to this article. Yet.
Sidebar



Stay up to date with our free newsletter
Always be the first to know about new updates, articles and other informative content.
Don't miss out, opt in!
We respect your privacy. No data is used for anything other than sending the newsletter!