DetailingWiki Newsletter
    Get free and automatic updates on new articles
    We respect your privacy. No data is used for anything other than sending the newsletter!

    Advertisement

Polishing machine Archives - Page 5 of 5 - DetailingWiki, the free wiki for detailers

Miscellaneous detailing related content

The best sprayheads

It is often asked on detailing fora and social media: “what is the best sprayhead”. Off course there is a difference between certain products and brands, but it is important to know what you are asking. In this guide I will try to explain what the problem is with this question unless it is asked more in-depth.

1 stage polish

When you polish a surface, the level of imperfection defines how much work it will be to achieve a perfect finish. This can either be a 1 stage polish, a 2 stage polish or even a 3 stage polish. Different types of stages needed define slightly what pads and/or polish you are going to need, and might give an indication of the time-frame needed.

3 stage polish

When you polish a surface, the level of imperfection defines how much work it will be to achieve a perfect finish. This can either be a 1 stage polish, a 2 stage polish or even a 3 stage polish. Different types of stages needed define slightly what pads and/or polish you are going to need, and might give an indication of the time-frame needed.

2 stage polish

When you polish a surface, the level of imperfection defines how much work it will be to achieve a perfect finish. This can either be a 1 stage polish, a 2 stage polish or even a 3 stage polish. Different types of stages needed define slightly what pads and/or polish you are going to need, and might give an indication of the time-frame needed.

Machine polishing a sharp contour by rotary

Yes, more videos of rotary polishing techniques (DA ones will be following soon as well), this time for panels with sharper edges and contours and as an example the wing of a Jaguar XJ was used. two videos here, covering roughly the same point.

The “best” product

It is often asked on detailing fora and social media: “what is the best XXXX”. Off course there is a difference between certain products and brands, but it is important to know what you are asking. In this guide I will try to explain what the problem is with this question unless it is asked more in-depth.

Introducing a Newbie to DA Polishing

The DA (Dual Action) polisher is considered by many to be the machine to use if you are new to machine polishing, though as discussed elsewhere, this is not always the case – rather, you should try wherever possible to try both styles of machine (DA and rotary) and see which suit your style the best as many will find the vibrations of DA polisher unsettling and this struggle with the control of the machine can actually make it more dangerous than the smoother rotary.

Machine polishing by Rotary – basic

One of the best ways to take your car’s paintwork to the next level is to use a machine polisher to remove the swirl marks and enhance the gloss by burnishing the finish. Polishing can be done by hand or by a dual action polisher. However, the rotary polisher represents the next step in machine polishing: a tool highly capable of fast correction but also capable of very high clarity, sharp and deep finishes.

What is polishing

Polishing is the act of using a light abrasive product to remove a very thin layer from the surface that gets polished. Usually this process is preceded by a very thorough cleaning of the surface.

Sidebar



Stay up to date with our free newsletter
Always be the first to know about new updates, articles and other informative content.
Don't miss out, opt in!
We respect your privacy. No data is used for anything other than sending the newsletter!