English English Nederlands Nederlands Deutsch Deutsch Italiano Italiano Español Español Français Français 简体中文 简体中文 Português Português Русский Русский
    DetailingWiki Newsletter
    Get free and automatic updates on new articles
    We respect your privacy. No data is used for anything other than sending the newsletter!

    Advertisement

polishing Archives - Page 4 of 13 - DetailingWiki, the free wiki for detailers

Manufacturers of Detailing related products

3M

3M is one of the largest manufacturers in the world in many different fields. 3M is known to be the owner of brands such as Scotchgard, Mguiars and many more. The company also makes many different products under their own brand.

What is rubbing polish

Rubbing polish is the act of using ones hand or skin to apply the polish to the surface by hand, and creating a moving effect in order to get a polishing effect on the surface underneath. The method can be compared to applying wax by hand.

When should I not polish

There might be certain situation in which it is advised to not polish a certain surface. This can be due to damage, time limit, thin surface or other factors. Knowing when not to polish might be as important as knowing when to polish.

Minimum paint thickness

The minimum paint thickness is an indication that there is no paint left to polish and should be avoided as much as possible. The downside is that this thickness is difficult to monitor or measure. Going passed this minimum thickness will result in strike-through of burn-through.

What is an applicator

Applicators are products that are used to spread, apply, rub or buff a certain product to a certain surface. These can also be referred to as an applicator pad. There are many several differen shapes, sizes and material that are used for this.

What are alloy wheels

Alloy wheels are specific wheels have been made out of aluminium or magnesium, with certain other elements added. They can come in various shapes and sizes and even the finish can differ greatly between models or brands.

Polishing rear softtop window

Polishing the rear softtop window of a convertible is not overly difficult, but might require a bit of trial to get the technique right. There are a few ways to handle this.

What is a finishing polish

A finishing polish is often considered the last step in the polishing process. It is a very fine polish that has a low grade of cut but a high level of perfect finish. A finishing polish can remove oxidation, marring, very light swirls and some of the minor imperfections.

What is a medium polish

A medium polish is a polishing product with a certain level of cutting. It will not remove RDS or severe surface imperfections, but it will will remove swirls, oxidation and several others. It is the most common step after cutting/compounding and if followed up by a finishing polish.

Farecla

Farecla is a manufacturer of detailing products located in Hertfordshire, United Kingdom. The company has a range of products aimed at refining and perfecting surfaces in several different ways.

Sidebar



Stay up to date with our free newsletter
Always be the first to know about new updates, articles and other informative content.
Don't miss out, opt in!
We respect your privacy. No data is used for anything other than sending the newsletter!