What is polishing by hand
Polishing by hand can either refer to applying polish with the bare hands, or by moving the polishing pad by hand instead of using a machine polisher. This article describes the latter.
Detailed knowledge for detailersDetailed knowledge for detailersArticles related to correction
Polishing by hand can either refer to applying polish with the bare hands, or by moving the polishing pad by hand instead of using a machine polisher. This article describes the latter.
The colored coat is sometimes referred to as the base coat. This is a layer of paint that holds the color in which the panel is to be painted. This layer covers the primer and is usually finished with a layer of clear coat.
The primer coat is used between the material the panel is made from and the layers of paint that will follow. In some cases there can also be filler underneath to make sure the panel is perfectly flat and smooth before starting to paint.
The clear coat is a transparent layer of paint that can be used to cover the colored coat. The clear coat is usually the last coat of paint that is applied to a panel. The thickness can vary a lot per panel and per manufacturer. On average it can be between 30 and 80 micron. The clear coat is not always used, single stage paint is not covered with a clear coat.
Junkman2000 is the channel of enthusiast detailer: A.J. Johnson. The Youtube channel with 164 videos has a steady stream of followers ever since it beginning in 2006 with 34.992 subscribers. Junkman2000 has a rough viewing audience of 4.648.607 views.
Tyre blooming is the discoloration of the rubber in a tyre. This usually shows as brown rubber that is hard to clean off. In general, it won’t get washed off and it might stain towels or applicators. Blooming doesn’t cause immediate damage, but over time it could shorten the lifespan of the tyres by a small amount.
Washworld Inc. is an American manufacturer of car wash systems. The company makes several different types of automatic car wash systems, including the needed support and training for these machines.
A vacuum cleaner is a device that uses underpressure to suck in air via an attachment (hose). The sucked in air will pull debris and dirt with the in going air, which often ends up in a removable bag. The vacuum cleaner makes it possible to transport material without mechanical cleaning or the use of cleaning liquids.
SCANGRIP is a Danish company that specializes in creating working lights that use LED technology. The range of product vary from lights with a certain spectrum, to lights that are aimed at high intensity.
RestorFX originates from 2006 and was founded by Alexander and Nadia Kay and Tony Dowsett. The company is located in Vancouver, British Columbia, Canada. It is one of only a few Canadian manufacturers of automotive detailing products.