Ceramic pro
Written by: Vinnie van Rooij
Ceramic Pro is the productline created by Nanoshine Ltd. Ceramic Pro consists out of pure ceramic type products, including a ceramic coating for automobile and marine.’
Contents
Ceramic Pro history
Nanoshine released the Ceramic Pro range in 2010 for automotive, marine and aeroplane industry. In 2011 the brand got official SGS certification for the Ceramic Pro products, the industrial range of the products signed a contract with Russion militairy aircraft manufacturer and oil pipe lines. In 2012 Ceramic Pro Textile was released and a partnership with ecurie25 was signed. The brand was featured at the Top Gear festival in Australia in 2013 which also saw the release of the new 9H Permanent Coating. In 2014 there where made some tweaks to the 9H Coating products. 2015 saw the release of Ceramic Pro Wheel and Caliper coating.
Ceramic Pro products
The brand focuses on ceramic products, these are products that are based on the usage of components such as (but not limited to) SiO2, Si3D and/or SiH4. They offer a wide range of ceramic product to protect different area’s. The most marketed one at the moment of writing is probably the 9H coating, which claims to offer a protective layer with the a hardness of 9H on the scale of Mohs.
Company information
Ceramic Pro is located in San Diego, America. It is not clear where Nanoshine Ltd is located. They have their own company website, and are active on Social Media. Ceramic Pro is not known to show up at car care events or larger detailer-related meetings.
There are multiple ways of drying your car. The most common one is drying with Microfiber towels. However, you can also use a device that blows air for blow-drying off the water. This can especially be handy when you have to deal with small spaces, crevices or trims that can hide water....
A spray wax is protective product in a liquid form, thin enough to be pushed through a sprayhead in order to spread it over a surface by spraying. The liquid is usually white and unscented....
22PLE is a manufacturer of high end synthetic coatings, mostly based on SiO2 technology. The company itself has a big audience in Australia....
Applicators are products that are used to spread, apply, rub or buff a certain product to a certain surface. These can also be referred to as an applicator pad. There are many several differen shapes, sizes and material that are used for this....
In the world of protective products, their are several different types. Many detailers will be familiar with wax, some also with sealants but not many will have heard of a coating. These coatings are special products that offer extreme durability and protection, but with a cost; much less easy to apply. The technology behind these products is also very different to sealants or wax. There are coatings for paintwork, glass, rubber and plastic. These product are also referred to as SiO2 coatings or...
Slim's Detailing is an English detailing webshop that also offers products under its own name. Slim's Detailing is part of the Morelli Group Ltd company....
Links to this article
There are no external links to this article. Yet.